Knowledgebase
Online Technical Support
Software Upgrades: Please check our latest Download section.
Search Tip: You can increase the accuracy of your searches by using as many keywords as possible. Remove any common words such as "a", "or", "the" as they will be used in the search. Do not use any operands such as +, or quotation marks to enclose phrases.
|
Our FAQ
# |
Title |
1 |
WAN configuration overview Overview of configuration of the WAN network addressing of the 833AS and 833IS. |
2 |
Local TCP/IP LAN devices cannot communicate After configuring the Perle 833 (and downloading the configuration) you can no longer commmunicate to TCP/IP LAN devices. If the Perle is removed from the network then communication will resume. |
3 |
Cannot administer the Perle after changing to RADIUS security After configuring the Perle 833AS or 833IS for RADIUS security, the Manager can no longer connect. |
4 |
833: Disabling RIP/dynamic routing How do disable RIP / Dynamic Routing on the Ethernet interface on the 833AS and 833IS. |
5 |
Ordering information for T1 / PRI Information to assist in ordering a channelized T1 or ISDN PRI line for the 833AS. |
6 |
When downloading configuration the Manager displays message about password When downloading the configuration to the 833RAS and 833AS server the Manager displays a message: User with Administrative Privileges must have a Password. |
7 |
Dial in client cannot communicate to LAN over TCP/IP A dial in PC connects to the Perle 833AS or 833IS but cannot communicate over TCP/IP to devices on the LAN. |
8 |
|
9 |
|
10 |
|
11 |
Lan-to-Lan example with a Cisco router The following document shows the basic steps needed to configure a Perle 833AS/IS and a CISCO 100 router for a LAN to LAN connection. |
12 |
What is ISDN? ISDN as it relates to the Perle 833AS and 833IS |
13 |
|
14 |
Event log messages for the 833AS Explainations of Event Log messages for the 833AS |
15 |
|
16 |
|
17 |
Manager states the config is Read Only When uploading a configuration from an 833AS unit the Manager reports that it is Read Only. |
18 |
833AS does not answer calls Trouble shooting information concering the 833AS using a T1 connection. |
19 |
|
20 |
T1/E1 Alarms and Errors 833AS T1/E1 card LED status |
21 |
|
22 |
|
23 |
|
24 |
Perle 833 does not answer call with groups configured Perle 833AS or 833IS does not answer an incoming call if groups are used. |
25 |
Dial in connection fails if using same log in user ID. Dial in connection fails when multiple dial in clients use the same log in user ID on the Perle 833IS or 833AS. |
26 |
Secondary PAP/CHAP challenge What UserID and Password does the Perle 833AS/IS use on a secondary PAP/CHAP challenge on a dial in connection. |