Knowledgebase
Online Technical Support
Software Upgrades: Please check our latest Download section.
Search Tip: You can increase the accuracy of your searches by using as many keywords as possible. Remove any common words such as "a", "or", "the" as they will be used in the search. Do not use any operands such as +, or quotation marks to enclose phrases.
|
Our FAQ
# |
Title |
1 |
Re-Setting to Factory Default Outlines the procedures to reset Jetstream, Lanstream, IOLAN+, IOPRINT+, 833 servers and P-series routers to the factory default settings. |
2 |
How To Put Or Restore A Configuration Files Describes the technique to retrieve or restore the config files for IOPRINT+ , JSxxxx ,CS9000 , Lanstream , IOLAN+ or any P-series Router. |
3 |
|
4 |
|
5 |
The print job cannot be printed when IOPRINT+ had been installed The print job cannot be printed from the NetWare server when IOPRINT+ had been installed completely and capture command re-routed DEVICE LPT1? |
6 |
Quickset fails when configuring the IOPRINT+ It fails when using QUICKSET to configure IOPRINT+ as Print Server or Remote Printer in Netware 3.x and Netware 4.x? |
7 |
How do you send control characters? How do you send control characters to a printer on the IOPRINT+ using WPConfig? |
8 |
How do I reset the IOPRINT+ if the IP address is unknown Print Server's IP address is forgotten and it needs to be installed in a new environment. How can I reset it? |
9 |
How do I assign the IP address for IOPRINT+ from a Unix host? How do I connect to the Ioprint+ using TCP/IP when it is in factory default from a Unix host? |
10 |
|
11 |
|
12 |
|
13 |
Restoring the IOPRINT+ print server to factory default settings. Use the following method of restoring the IOPRINT+ to factory default settings using FTP whenever the IP address of the unit is unknown and/or the BIADMIN utility doesn't detect the unit. |
14 |
Configure the IOPRINT+ using FTP This method of configuring the IOPRINT+ uses FTP. |
15 |
|
16 |
|
17 |