How to add a default gateway (IOLAN all models)

Issue:
How do I add a default gateway from a command line . Using a telnet session or Admin port.

Solution:

Login into the IOLAN, admin user level,

Login: admin

Password:xxxxxxxxx

 at the # type the following, for this example the default gateway is a router, you can choose any name.

This document assumes the IOLAN's IP address and Subnet mask has already been set.

SDS1# add host router 10.10.100.10

SDS1# add gateway router default

Save the entry

SDS1# save

Save config to flash ROM y/n y

Saving to flash ROM. This may take several seconds. Please wait...

Show the gateway entry

SDS1# show gateway

Gateway           Service   Internet Address?Gateway Type

router          ?Default                     Host

SDS1#

reboot the IOLAN for the route to take effect.


Article ID:
 557
Published:
 10/5/2009 12:30:17 PM
Last Modified:
 10/5/2009 12:53:41 PM
Keywords:
 iolan default gateway, gateway, adding a gateway,