Configure PerleView to use ICMP ping messages for the discovery

Issue:
PerleView is not able to find any Managed Media Converters on the network.

Solution:
Configure PerleView to use ICMP ping messages for the discovery of Managed Media Converters (MMCs).

  • In PerleVIEW, select Devices -> Discovering Devices
  • Select the Default Device Discovery task and click the Edit button.
  • Enable device discovery using IP addresses and in the list enter the range of IP addresses belonging to your MMCs.
  • Click + to expand Optimize discovery
  • Enable “All devices/networks support UDP messages on port 33815 and 33816”
  • Enable “All devices /networks support ICMP ping messages” and enter a Protocol Timeout 3 seconds and Protocol Retries 10.
  • Click Apply.
  • Click the “Run Now” button.


Article ID:
641
Published:
3/17/2021 11:00:40 AM
Last Modified:
3/17/2021 11:07:07 AM
Keywords:
PerleView, ICMP, ping, media, converter
Issue Type:
Configuration