Knowledgebase
Online Technical Support
Software Upgrades: Please check our latest Download section.
Search Tip: You can increase the accuracy of your searches by using as many keywords as possible. Remove any common words such as "a", "or", "the" as they will be used in the search. Do not use any operands such as +, or quotation marks to enclose phrases.
|
Issue:
It fails when using QUICKSET to configure IOPRINT+ as Print Server or Remote Printer in Netware 3.x and Netware 4.x?
Solution:
STEP 1: Check Both LED status
Green LED | Red LED | Status |
Off | Off | No power to the print server |
On | On | Hardware error or connection with file server is broken |
On | Off | The IOPRINT is working normally |
Flashing | On or Off | The print server is transmitting to or receiving packets from the network |
STEP 2: Check Network Cable
(2.1) Make sure the Network Cable is work properly.
(2.2) Connect Network Cable before you power on IOPRINT.
(2.3) Connect ONE network cable at a time.
STEP 3: If the # of characters of your file server name is more than 20 char, please shorten it to less than 20, there is a limitation.
STEP 4: Please issue "set" command at console -> then choose "communication" -> then type " SET Reply To Get Nearest Server = on " at console.
STEP 5: Login on to the file server with supervisor rights
STEP 6: Using the QUICKSET.EXE in the IPX/SPX utility diskette that came with IOPRINT +.
STEP 7: If you still can not use QUICKSET.EXE to install --> Use PCONSOLE and PSCONFIG to configure the IOPRINT +