Knowledgebase
Online Technical Support
Software Upgrades: Please check our latest Download section.
Search Tip: You can increase the accuracy of your searches by using as many keywords as possible. Remove any common words such as "a", "or", "the" as they will be used in the search. Do not use any operands such as +, or quotation marks to enclose phrases.
|
Issue:
What information is required to config a 394 for sdlc on the host computer
Solution: SWITCHED LINE COMPARISONS
AS/400 LINE PARAMETERS |
SDLC SWITCHED LINE entries (Note: Perle 394 configured for the SDLC option) |
X.21 SWITCHED LINE entries (Note: Perle 394 configured for the X.21 Switched option) |
X.21 SHORT-HOLD MODE LINE (Note: Perle 394 configured for the X.21 Switched option) |
Data Link Role |
*PRI |
*PRI |
*PRI |
Physical Interface |
*V.35 or *RS232V24 |
*X21 |
*X21 |
Connection Type |
*SWTPP |
*SWTPP |
*SHM |
SHM Node Type |
N/A |
N/A |
*T20 |
NRZI Data Encoding |
*NO or *YES. Must match the Perle 394. |
*NO. |
*NO. |
Calling Number |
Host Network Address |
Host Network Address |
Host Network Address |
AS/400 RWS CONTROLLER PARAMETERS |
| ||
Link Type |
*SDLC |
*SDLC |
*SDLC |
Switched Connection |
*YES |
*YES |
*YES |
Short-Hold Mode |
*NO |
*NO |
*YES |
Exchange Identifier (Required) |
05F000xx, xx= Station address. Only Station address must match the Perle 394. |
05F000xx, xx= Station address |
05F000xx, xx= Station address |
Connection Number |
Remote Network Address |
Remote Network Address |
Remote Network Address |
Station Address |
Values range from 01 - FE. Must match the Perle 394. |
Value range from 01 - FE |
Values range from 01 - FE |
Dial Initiation |
*Linktype or *Immed |
*Linktype or *Immed |
*Linktype or *Immed |