Knowledgebase
Online Technical Support
Software Upgrades: Please check our latest Download section.
Search Tip: You can increase the accuracy of your searches by using as many keywords as possible. Remove any common words such as "a", "or", "the" as they will be used in the search. Do not use any operands such as +, or quotation marks to enclose phrases.
|
Issue:
Configuring Trueport for AIX for Standard Mode.
Solution:
Standard mode is only supported when Trueport is used with a Jetstream/Lanstream server.
With Standard mode the Trueport serial ports operate exactly like standard serial ports and support a full range of serial I/O commands (IOCTLs).
To configure Trueport for AIX in Standard Mode you will need to set the Hostname/IP address field to "NONE", then specify the number of devices you want created:
Add Terminal Server
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
* Hostname or IP address [NONE]
* Number of ports [24] #
Base TCP/IP port number [10001] +#
Keep alive timeout (seconds) [30] +#
Enable logins now ? [Yes] +
Note: When configured for Standard Mode, Trueport is a listening process. Ensure the Jetstream/Lanstream is configured for Service = Silent Raw.
Article ID: 310
Published: 3/20/2003 1:33:49 PM
Last Modified: 8/17/2004 11:18:17 AM
Issue Type: Configuration
We can provide more information about our products or arrange for a price quotation.
Send an Email
Call Us