Knowledgebase
Online Technical Support
Software Upgrades: Please check our latest Download section.
Search Tip: You can increase the accuracy of your searches by using as many keywords as possible. Remove any common words such as "a", "or", "the" as they will be used in the search. Do not use any operands such as +, or quotation marks to enclose phrases.
|
Issue:
How to configure a device server for a simple PPP dial in connection.
Solution:
There are three steps in configuring a simple non-routed PPP dial in service:
1. configure a modem
2. configure the line
3. configure PPP
First add the modem and the initialization string.
example: AT&C1&D2S0=1&W
Configure the Line for PPP service and configure it for Dial In.
Ensure that your serial configuration matches your modem.
example: 115200, 8, N, 1, Hardware flow.
Configure the PPP setting for Proxy ARP support:
The Local IP Address = 0.0.0.0
The Remote IP address to be assigned to the dial in client must be an address from the LAN
The authentication method should be set to PAP or CHAP. Create new users in the Local User list (do not use the Ruser).
Dial in with your prefered PPP client.
Related
Articles:
1.) How to obtain a modem initialization string using Windows
1.)
Article ID: 64
Published: 1/13/2003 3:45:16 PM
Last Modified: 5/1/2007 8:06:13 AM
Issue Type: Configuration
