Knowledgebase
Online Technical Support
Software Upgrades: Please check our latest Download section.
Search Tip: You can increase the accuracy of your searches by using as many keywords as possible. Remove any common words such as "a", "or", "the" as they will be used in the search. Do not use any operands such as +, or quotation marks to enclose phrases.
|
Issue:
Shortly after bootup the Jetstream or CS9000 server it stops responding on the LAN.
The console displays a message:
deleting route to interface eth0
Cause:
Jetstream firmware problem: This problem occurs on firmware versions 2.3.1 and 2.3.2.
The Jetstream will delete it's route entry for the local LAN if it does not recieve a RIPv1 message stating that the route is active.
Also this problem can occur if RIP is enabled on the Jetstream/CS9000.
Solution:
Upgrade the Jetstream unit to the current firmware version.
Disable the Route Daemon (RIP) on the unit and ensure all Gateway entries are configured as Passive.
Related
Articles:
1.) Upgrading firmware for a Jetstream/CS9000
2.) How to disable RIP on the Jetstream and CS9000
1.)
Article ID: 69
Published: 1/15/2003 8:54:03 AM
Last Modified: 2/6/2004 1:57:45 PM
Issue Type: Trouble Shooting
