Knowledgebase
Online Technical Support
Software Upgrades: Please check our latest Download section.
Search Tip: You can increase the accuracy of your searches by using as many keywords as possible. Remove any common words such as "a", "or", "the" as they will be used in the search. Do not use any operands such as +, or quotation marks to enclose phrases.
|
Issue:
394 controller front panel LED displays error b8 (or 68).
Cause:
The 394 floppy diskette drive not reading the controller software diskette.
Solution:
A 394E,394T or 394TX controller displaying error message b8 refers to the floppy drive in the controller,this error can be caused by one or all of the following.
1) The floppy diskette in the disk drive is dirty or scratched.
2) The disk dirve is dirty.
3) The disk drive is defective.
4) The Host Communicating Controller Card (HCP) is defective.
To resolve this error.
1) Try to clean the disk drive with,a vacumm cleaner or canned air.
2) Clean the disk drive read/write heads with a head cleaning kit.
3) Replace the 394 software diskette with a backup copy.
If none of the above work, the unit will require servicing.
Related
Articles:
1.) Creating new controller software disk(s)
1.)
A download version of the controller software V6.66G