Knowledgebase
Online Technical Support
Software Upgrades: Please check our latest Download section.
Search Tip: You can increase the accuracy of your searches by using as many keywords as possible. Remove any common words such as "a", "or", "the" as they will be used in the search. Do not use any operands such as +, or quotation marks to enclose phrases.
|
Our FAQ
# |
Title |
1 |
SX Host card with MTA's and TA's Problems with data flow due to timing issues when using the SX card with older MTA8's or TA's. |
2 |
Port enable error 255 When starting the Serial Port Enable utility on SCO OpenServer 5 for the SX card an error is generated [Port Enable Error 255] and the utility fails to start. |
3 |
SX driver fails to load card There are two primary reason's for a detection / driver load failure for the SX host card. |
4 |
Technical tips for SX card on Linux Question & Answer for problems encountered with the SX host card on Linux. |
5 |
TA8 does not work with CTS/RTS flow When CTS/RTS flow is used with the TA8, the signals are not working properly. |
6 |
DIP switch settings for the ISA card The settings for the DIL switch on the SI/XIO/SX ISA card. |
7 |
Specialix EISA and MCA configuration files Where can you get the Specialix EISA and MicroChannel configuration files for the I/O8+, SI/XIO and RIO serial cards. |
8 |
VT type list is not complete When using the Perle-Serial or Speed port configuration utility, the VT type list does not display your terminal type. |