Issue:
After installation of the AT-FAST, under SCO UNIX, the card runs very slowly and seems to run in bursts?
Cause:
This is an IRQ conflict of some nature
Solution:
Here are the issues to check.
1. Check an output of a hwconfig –h command and look for any IRQ conflicts. 2. The machine is a dual bus machine and the PCI bus has the IRQ reserved for its own use, to change this the BIOS setting have to be changed, this is quite common with most cards used in SCO.
Article
ID: |
157 |
Published: |
2/3/2003 8:50:26 AM |
Last
Modified: |
2/3/2003 8:50:26 AM |
Issue Type: |
Trouble Shooting |
|