|
Issue:
Ioland presents a tty-like interface to the application in much the same way as a serial port.
Ioland can work with all terminal servers but if you require full I/O control (STREAMS tty modules) over the device then you can only use an Iolan+ terminal server with Ioland.
Note: not all operating systems are supported for pushing the STREAMS tty modules.
Ioland is a calling process so the terminal server must be configured to listen for the connection: Iolan+ Access = Listen or Remote Mode = Raw or Telnet
Jetstream Service = Reverse Raw or Reverse Telnet
Solution:
The Iolan+ User Guide describes the specific options available for the Ioland utility.
Related
Articles:
1.) Using the iconfig utility to configure ioland with an Iolan+ server
Article
ID: |
440 |
| Published: |
11/10/2003 3:54:09 PM |
Last
Modified: |
11/10/2003 3:54:09 PM |
Issue Type: |
FAQ |
|