|
Issue:
Ioprint+ FAST DIP switch settings.
Solution:
10/100BaseT DIP Switches
The 2 DIP switches are used to determine the operating mode. Their function is as follows.
| Switch |
Description |
| 1 |
Auto Negotiation Switch.
When ON , the device will select 10BaseT/100BaseT and Full/Half Duplex as required. The recommended position is ON; switches 2 & 3 are disabled when Auto Negotiation is ON. |
| 2 |
10/100BaseT Manual Select Switch.
Set ON for 100BaseT or OFF for 10BaseT.
Switch 1 must be OFF for this switch to function. |
| 3 |
Full/Half Duplex Switch.
Set ON for Full duplex operation or OFF for Half Duplex operation.Switch 1 must be OFF for this switch to function. |
For more details refer to the Ioprint+ Installation & Config guide found on the CD-ROM
Article
ID: |
456 |
| Published: |
12/19/2003 8:29:38 AM |
Last
Modified: |
6/14/2007 2:46:40 PM |
Issue Type: |
Configuration |
|