Knowledgebase
Online Technical Support
Software Upgrades: Please check our latest Download section.
Search Tip: You can increase the accuracy of your searches by using as many keywords as possible. Remove any common words such as "a", "or", "the" as they will be used in the search. Do not use any operands such as +, or quotation marks to enclose phrases.
|
Issue:
I keep getting errors when I try to connect my system such as ``RTOOB" or ``CWBSY1000" using Client Access and Netsoft Router. How do I get rid of these errors?
Solution:
Make sure you know the following information
: a) Workstation Address of this pc on the as/400 under the Links Tab
b) The System Name of the AS/400 under the System tab
This can be found by keying in DSPNETA on any command line on the AS/400
terminal. The Default Local Location Name field.
c) Local Specific Name under the LU Tab
===========================================================================
If any of this information isn't known, you can
:===========================================================================
Click Start
Click Programs
Click Client Access
Doube Click NetSoft Router
Double Click NetSoft Administrator
Right Click On the netsoft router on the right
Click Properties
Click Links Tab
Double click twinax
Copy the workstation address (0, 1, 2, 3, 4, 5, or 6)
Click System tab
Copy the system name
Click LU tab
Copy the Local Specific Name
===========================================================================
To Delete and Recreate the Router
:===========================================================================
1) Click Start
Click Programs
Click Client Access
Doube Click NetSoft Router
Double Click NetSoft Administrator
2) Right Click On the netsoft router on the right
Click Delete
Click Yes to "Are you sure you want to delete?"
3) Click Workspace option (drop down menu at top of page)
Click New
Click NS Router
This will drop a new router on the right hand side of the split
screen where the old router was.
4) Right Click NS/Router
Click Properties
Click Link Tab
Double click Twinax
Key-in The twinax address of this workstation on
the AS/400
Click System tab
Click Add
Key-in Your system name
This can be found by keying in DSPNETA on any
command line on the AS/400 terminal. The Default
Local Location Name field.
Click Ok
In the lower half of the screen on the system tab, make sure there
is a check in the box to set as default system.
Click LU tab
Click Enter local specific
Key-in A unique name for this pc (i.e. Leadtech)
Click Ok
Router has been recreated.
===========================================================================
Enabling 16 Bit Support in Client Access
===========================================================================
Click Start
Click Program
Click Client Access
Double click Client Access Properties
On the far right of this screen
: Click On the others tab
On the lower half of the screen, make sure the box for enable 16 bit
support has a check in it.
Click Apply (This will reboot your machine).