Knowledgebase
Online Technical Support
Software Upgrades: Please check our latest Download section.
Search Tip: You can increase the accuracy of your searches by using as many keywords as possible. Remove any common words such as "a", "or", "the" as they will be used in the search. Do not use any operands such as +, or quotation marks to enclose phrases.
|
Issue:
The Perle controller will not boot has in the display 720||FF F0E300
Cause:
Can be caused by a faulty floppy diskette or floppy disk drive.
Solution:
Try the software backup diskette or create new software diskette.
Sometimes this can be caused if the floppy drive is dirty.
In very few cases has been known to be caused by the Sync card.
try reseating the Sync card.
Related
Articles:
1.) Creating new controller software disk(s)