Knowledgebase
Online Technical Support
Software Upgrades: Please check our latest Download section.
Search Tip: You can increase the accuracy of your searches by using as many keywords as possible. Remove any common words such as "a", "or", "the" as they will be used in the search. Do not use any operands such as +, or quotation marks to enclose phrases.
|
Issue:
How to configure PerleTALK Windows and Perle 394e.
Solution: Note: For illustration purposes is a configuration example using Port 0 on the Perle 394e ASCII card. Also using workstation address 0. Configure Port 0 definition in the Perle 394e ASCII port 0 as shown below. Most importantly make sure that both of the "Changeable" options are set for "YES". Device Type: PTALKWIN Changeable: *YES Workstation Address: 0 Changeable: *YES Session Type: Display Baudrate: leave this field blank Bits per character: 8 Parity: None Stop bits: 1 Handshake method: RTS Device Ready Method: DCDDSR Configure the Workstation 0 definition Select workstation address 0 in the Perle 394e ASCII configuration and change the Device emulation for 3180. Leave all else at default settings. Configuration for Port 0 is complete. Next Configure PerleTalk for Windows. Select the following menu options and selections: Configure / ASCII Connection --> 394e / Click OK Configure / Session / Add / Device Type: Display / Session Name: Session A / Address: 0 / Click OK Configure / Host Connection / Add / enter the "Host Name" ie, Perle 394e / enter the "Phone Number" to dial / Click OK / Click the button "Set as Default Host" / Select "Connect to Default Host" / Click OK. Configure / Communication settings / Port: specify the COM port that your PC modem is attached to / Baud Rate: specify the connection speed / Handshake: Hardware / Click OK. Configure / Modem Settings --> specify your modem type / Dialing option: specify Tone or Pulse / change the "Wait for connection" to 120 seconds / Click OK. Configure / Mapping --> 5250 To connect to the Perle 394e, select "Session" on the menu bar, then select "Activate" --> Session A. Note: For illustration purposes is a configuration example using Port 0 on the Perle 394e ASCII card. Also using workstation address 0. Configure Port 0 definition in the Perle 394e ASCII port 0 as shown below. Most importantly make sure that both of the "Changeable" options are set for "YES". Device Type: PTALKWIN Changeable: *YES Workstation Address: 0 Changeable: *YES Session Type: Display Baudrate: leave this field blank Bits per character: 8 Parity: None Stop bits: 1 Handshake method: RTS Device Ready Method: DCDDSR Configure the Workstation 0 definition Select workstation address 0 in the Perle 394e ASCII configuration and change the Device emulation for 3180. Leave all else at default settings. Configuration for Port 0 is complete. Next Configure PerleTalk for Windows. Select the following menu options and selections: Configure / ASCII Connection --> 394e / Click OK Configure / Session / Add / Device Type: Display / Session Name: Session A / Address: 0 / Click OK Configure / Host Connection / Add / enter the "Host Name" ie, Perle 394e / enter the "Phone Number" to dial / Click OK / Click the button "Set as Default Host" / Select "Connect to Default Host" / Click OK. Configure / Communication settings / Port: specify the COM port that your PC modem is attached to / Baud Rate: specify the connection speed / Handshake: Hardware / Click OK. Configure / Modem Settings --> specify your modem type / Dialing option: specify Tone or Pulse / change the "Wait for connection" to 120 seconds / Click OK. Configure / Mapping --> 5250 To connect to the Perle 394e, select "Session" on the menu bar, then select "Activate" --> Session A.