Knowledgebase
Online Technical Support
Software Upgrades: Please check our latest Download section.
Search Tip: You can increase the accuracy of your searches by using as many keywords as possible. Remove any common words such as "a", "or", "the" as they will be used in the search. Do not use any operands such as +, or quotation marks to enclose phrases.
|
Our FAQ
# |
Title |
1 |
VPN using IKE pre shared keys How to configure Perle routers for VPN using IKE pre-shared keys. |
2 |
Backup line support Can the P routers be configured to automatically bring up a back-up line if the PPPoE connection fails? |
3 |
Firmware upgrading for P-series Routers Describes the process of upgrading the firmware for the P-series router via TFTP. |
4 |
Re-Setting to Factory Default Outlines the procedures to reset Jetstream, Lanstream, IOLAN+, IOPRINT+, 833 servers and P-series routers to the factory default settings. |
5 |
How To Put Or Restore A Configuration Files Describes the technique to retrieve or restore the config files for IOPRINT+ , JSxxxx ,CS9000 , Lanstream , IOLAN+ or any P-series Router. |
6 |
ISDN Call-Back Configuration for P-series Routers describes the method used to configure call-back for an ISDN line using P-series routers. |
7 |
P-Series Router ISDN dial-on demand ISP Configuration Describes the procedure to use to define an auto-call to an ISP. |
8 |
|
9 |
Frame-Relay Configuration for P-Series Routers Outlines the procedure used to configure a frame-relay link. |
10 |
|
11 |
|
12 |
|
13 |
Remote Access to P-8xx Series Routers Describes the method to use to access the router via a modem connection. |
14 |
|
15 |
|
16 |
|
17 |
G.703 Cards not being recognized on Perle P2600 Routers G.703 Cards not being recognized on Perle P2600 Routers |
18 |
|
19 |
|
20 |
|
21 |
|
22 |
|
23 |
|
24 |
|
25 |
T1 crossover cable T1 crossover cable specs for back to back testing of Pseries routers (T1 models only) |
26 |
|
27 |
|
28 |
|
29 |