Knowledgebase

Online Technical Support

Software Upgrades: Please check our latest Download section.

Search Tip: You can increase the accuracy of your searches by using as many keywords as possible. Remove any common words such as "a", "or", "the" as they will be used in the search. Do not use any operands such as +, or quotation marks to enclose phrases.

Perle Knowledgebase

Our FAQ

#	Title
1	Cannot use the Save or Reboot command line options When using the Windows Telnet client to configure the serial server products, with CLI commands that require a Y/N answer is bypassed and returns back to the command line. In some cases, communication to attached serial devices will appear that the device's prompts are being echoed/repeated or displays double prompts or jumps an additional line.
2	IOLAN+ RJ45 Pin Specs What are the pin specs for the RJ45 serial ports on the IOLAN+ server?
3	Re-Setting to Factory Default Outlines the procedures to reset Jetstream, Lanstream, IOLAN+, IOPRINT+, 833 servers and P-series routers to the factory default settings.
4	How To Put Or Restore A Configuration Files Describes the technique to retrieve or restore the config files for IOPRINT+ , JSxxxx ,CS9000 , Lanstream , IOLAN+ or any P-series Router.
5	PPP dial-in configuration for the IOLAN+ How do I configure a PPP dial-in connection on the IOLAN+ server.
6	Trouble-shooting IOLAN+ LPD printing provides some trouble shooting ideas when printing problems are encountered using remote printers that are attached to the IOLAN+ terminal Server.
7	IOLAN+ TCP/IP printing from Windows 2000, XP or NT4
8	IOLAN+ Logging feature
9	How to reset the IOLAN+ Admin password
10	How to send a 'break' on an Iolan+ reverse telnet connection.
11	Who is listening ? A general overview of TCP/IP socket connections and the configuration of the Perle serial servers.
12	Setting an ethernet MAC address in the IOLAN+ serial server.
13	Local authentication example for PPP How to configure the IOLAN+ for Local authentication when using PPP.
14	Using a Perle Serial server and m3i for IP management How to use a Perle serial server in conjunction with a model 3i to give TCP/IP LAN PC's connectivity to the AS/400.
15	SNMP read/write access How to set the SNMP write community on the Iolan+ server.
16	Using the iconfig utility to configure ioland with an Iolan+ server
17	Linux LPR printing using Perle serial servers.
18	Managing the IOLAN+ serial ports from a remote dial-up line. A modem dial-in connection can be configured on the IOLAN+ to manage the serial ports from a remote location. Useful when the IOLAN+ is configured as a console server and the LAN connection is down and/or the only means you have to manage the IOLAN is via a dial-up line.
19	IOLAN+ 48v specifications
20	Cannot connect to Iolan+ after creating ARP entry
21	IOLAN+ and Cisco Catalyst 3550 switch tech tip
22	IOLAN+ and FAST4 cables UltraPort serial card cable compatibility with the IOLAN+ RJ45 and FAST4 RJ45 ports.
23	Perle Console/Server - no response from Linux Host serial COM port.
24	Windows 2000 and 2003 BOOTP services Tech note on BOOTP support with Windows 2000 server and Windows Server 2003 DHCP service.
25	IOLAN+ error message: The IOLAN+ is reporting error message: "The firmware image is corrupt or has not been programmed".
26	IOLAN+ config to simulate a matrix switching box
27	Iolan+ VModem does not disconnect when +++ATH is issued.
28	Iolan+ fails to boot and displays error message The identification number hidden within the code is wrong and the code cannot be booted.
29	Iolan+ fails to reset to factory defaults. Iolan+ fails to load default settings When using the bootstrap menu to reset to factory defaults.

Next 30

FAQ Home | Newest Articles | Top 10 Articles | Suggest New Article